Basic Info.
Cyclone Type
Hydrocyclone
Transport Package
Naked in Container
Product Description
New condition Gold Dredging Equipment
Product Description
Application
1. Dredger is used for cleaning river silt,sand production and mining project.
2.Suitable for heavy duty operations in tropical climates and in sheltered waters.
Specfication
1.Fully road transportable and dismountable.
2.The vessel is constructed an designed for operations inshore.
3.The complete dredger consists of one main pontoon and four side pontoons.
4.Side pontoons are mounted to the main pontoon by heavy duty steel eyes and
pins at the bottom of the hull with bolt connection at deck level.
Features
1.Easily assemble and dismanting.
2.Transported by road ,rail or sea,one man operation.
3.Assembled with advanced hydraulic system and water-cooling diesel engine
4.Spare parts are available. Completely tested before delivery.
5.The dredgers can be made according to customers' request.
Product Description
1. Design
Ourdredgers are designed by senior engineer, who have specialized in shipbuilding and dredging work for many years. It guaranteesthat our dredgers are well-designed and of high-quality.
2. Good processing & Ex-work testing
Every dredger is built by skilled workers and inspected strictly to assure its high quality. Each finished dredger will be tested in testing center to make sure it works smoothly when delivered to customers.
3. Dredger description
Sand suction transporter is made up of sand suction transporter and small sand dredger. It can not only dredge sand in the river, but also can load sand to the river shore.
This dredger can unload sand into river and then the small shore sand suction dredger sucks sand into river shore, or it has a set of pump, so the sand will be discharged to river shore by the pump.
1. Please check our dredger from customer' work site, that shows some successful cases.
Here are the conditions for our dredger ship to show:
Product Description
1. Cutter suction dredger introduction
This is a kind of non-self propelled, hydraulic cutter suction dredger, with dismantle type of pontoons and can be assembly at the work place. Equipment on the dredger are as bellows: traversing device, cutter ladder lifting device, trolley device, hydraulic device for spuds lifting and down, and deck crane. The working process is as following: the cutter head cut the sand and mud underwater for mixture of slurry, then through the dredging pump, then by pipeline to send slurry to the work place.
2. List for cutter suction dredger
| Model | Inch | Water flow | Solid sand capacity | Dredging depth | Distance | | HL150 | 6 Inch | 550m3/h | 110cubic meter/h | Max. 6m | 600m | | HL200 | 8 Inch | 800m3/h | 160cubic meter/h | Max.8m | 800m | | HL250A | 10 Inch | 1100 m3/h | 220 cubic meter/h | Max.10m | 1100m | | HL250B | 10 Inch | 1450m3/h | 290cubic meter/h | Max.10m | 1100m | | HL300 | 12 Inch | 2500m3/h | 500cubic meter/h | Max.12m | 1200m | | HL300A | 12 Inch | 2500m3/h | 625cubic meter/h | Max.20m | 1700m | | HL350 | 18 Inch | 3000m3/h | 600cubic meter/h | Max.15m | 1500m | | HL450 | 18 Inch | 3500m3/h | 700cubic meter/h | Max.15m | 1500m | | HL450A | 18 Inch | 3500m3/h | 875cubic meter/h | Max.20m | 1800m | | HL500 | 20 Inch | 6000m3/h | 1200cubic meter/h | Max.15m | 2000m | | HL500A | 20 Inch | 6000m3/h | 1500cubic meter/h | Max. 20m | 2000m | | HL600 | 24 Inch | 8000m3/h | 1600cubic meter/h | Max.18m | 1800m |
Application
1. Dredger is used for cleaning river silt,sand production and mining project.
2.Suitable for heavy duty operations in tropical climates and in sheltered waters.
Specfication
1.Fully road transportable and dismountable.
2.The vessel is constructed an designed for operations inshore.
3.The complete dredger consists of one main pontoon and four side pontoons.
4.Side pontoons are mounted to the main pontoon by heavy duty steel eyes and
pins at the bottom of the hull with bolt connection at deck level.
| Dredger LOA | 41.0m | | Hull size(L×B×H) | 31.0×9.3×3.2m | | Main pontoon(L×B×H) | 18.2×3.7×3.2m | | Side pontoon (L×B×H) | 28.0×2.8×3.2m | | Structure | Can be dismantle and re-assemble easily ,box structure, lower delivery cost | | Main engine brand & power | Weichai-MAN /2190kw | | Auxiliary engine brand& power | Jichai/450kw | | Harbour generator | 30GF/Cummins | | Dredging pump | Warman Technology | | Discharge pipe inner Dia.. | 600mm | | Head | 63m | | Max. dredging depth | 16m | | Water flow | 5500m³/h | | Solid sand capacity | 1100m³/h | | Discharge distance | 2000m | | Cutter head Dia. | 2050mm | | Cutter power | 300kw | | Draught | 1.7m | | Displacement | 385T | | Hydraulic control system | PLC Siemens | Wire rope pulling force
(Lifting winch )*Quantity | 160KN *1 | Wire rope pulling force
(Traversing winch )*Quantity | 100KN *2 | | Operation room | Adjustable chair, movable side-window, air condition, PLC system, signal lights and floodlights | | Total weight | 370T | | Total power | 2640kw | | Total fuel oil consumption | 396L/H |
3. Technical specifications for 24inch cutter suction dredger with double dredging pumps| Max. dredging depth 45° | 20m | | Discharge distance | 2000m | | LOA | 46m | | Dredger after assembly | Length* width* depth 39*10.5*2.75m | | Engine room pontoon | Length* width* depth 18.15*3.5*2.75m | | Side pontoon | Length* width* depth 38*3.5*2.75m | | Structure | Can be dismantle and assemble at working site | | Average draught | 1.7m | | Diameter discharge pipe | 500mm/20inch | | Diameter suction pipe | 650mm/26inch |
A GENERAL ARRANGEMENT
Equipment arrangement the following: from front to back of dredger
1) Cutter
2) Cutter Ladder and Suction pipe
3) Ladder
4) Swing winches (2 sets)
5) Ladder winch (1 set)
6) Operating cabin
7) Harbor diesel engine generator set
8) Deck crane
9) Dredge pump
10) Gearbox
11) Main diesel engine
12) Auxiliary diesel engine
13) Generator and high pressure hydraulic pump, emergency hydraulic pump
14) Spuds and spud hoisting rams ( each 2 sets )
B. FEATURES
1) Completely assembled and fully tested before delivery
2) Simple, rapid assembly and dismantling
3) Standard design, allowing early delivery and low price
4) Spare parts available from stock
5) Free for one set of spare parts
6) Can be delivered to any location where need dredging
7) Responsible for installation and training of operators in the dredging place
8) Transportable by road, rail or sea
9) Reliable engine capability , dredging pump capability and hydraulic system
10) Fresh water engine cooling system
11) Efficient fuel consumption
12) One-man operate dredger by Programmable Logic Controller ( PLC system )
13) Air conditioning - Vessel Standard equipment
14) Wide range of optional equipment available |
| 1. Principal characteristics | |
| Overall length*width*depth | 27m*5.3m*2.1m |
| Dredging depth | 15m |
| Discharge distance | 500m |
| Water Flow | 1800-2200m³/hr |
| Sand capacity | 270-330m³/hr (15%) |
| Suction/Dishcarge Pipe Dia. | 350mm/300mm |
| 2.Engine | |
| Main engine | Cummins 482kw @1800RPM |
| Aux engine | Cummins,110kw @1800RPM |
| Fuel Consumption | 220g/kw.h |
| 3.Cutter | |
| Diameter | 1200mm |
| Rotation speed | 30rpm |
| 4.Winchs | 5 units |
| Ladder Winch | 1 unit |
| Swing Winch | 2 units |
| Anchor Winch | 2 units |
2, Our dredger simple introduction:
The HYCSD 6/4,8/6,10/8, 12/10, 14/12, 16/14, 18/16,24/18 ,24/20,series dredgers apply to all kinds of soil which are widely used in port, channel dredging and reclamation works. This series of products absorb advanced technology of Dutch and American related products with features of all hydraulic control, simple ,operation, easy maintenance, rational design, novel layout and strong power. The maximum dredging depth is 25m and discharge distance is 6000m.
If you are not interested in dredger model referred above, please kindly check this form,
I think there will be dredger model could suit for you.
Address:
a Area, 303, Road Daye Gong, Shanghai, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Shanghai Super-Above Industry Holdings Co., Ltd is officially approved by Shanghai governmental foreign economic relations and trade commission, we are famous building machinery manufacturer, and professional construction machinery exporter and one stop solution supplier in China, with more than 10 years experience.
We always keep the service philosophy " Running on Faith, Keep Promise, Focus On Customer Concerns, Walk to Success with Customer", devote ourselves to what customers need, and provide products & service with high performance and competitive price.
After years of market expansion and win-win cooperation, we successfully participated as package equipment supplier in many oversea projects, established and consistently keeping good business relationship with many general contractors, civil engineering firms and construction companies throughout the world. To provide high performance products with short delivery time, to make quick reaction for spare parts and after-sales services, to visit clients regularly for training and maintenance. Super-Above enjoy clients′ trust and good reputation.
Super-Above hope to become your reliable partner in China, we can offer the one-station service from Pre-sale ( invest profit and cost analysis, ground inspection, equipment plan making), Sale ( strict goods inspection, safety and professional logistic service, goods tracking during shipment), After-sale ( engineer′s service, training, installation and quick feedback).
Super-Above offer Super Service and Above Quality!
){kind=link}