| Condition: | New |
|---|---|
| Maximum Lifting Height: | 30-40m |
| Maximum Lifting Weight: | 70t |
| Shaft Number: | 3 |
| Crane Jib: | Five-Arm |
| Type: | Folding |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier PRODUCTS DESCRIPTIONS
QY70K-1 70 ton rc truck crane
1.High-power air-conditioner meets the requirements of T3 working condition
2.Hydraulic heat radiation system with superpower, permissible ambient temperature exceeds 55ºC
3. High-temperature resistant and ageing resistant wiring harness, service life covers product lifecycle
4.High-temperature resistant sealing elements, working efficiency is improved by 10%
5.High-temperature resistant oil for the whole crane is normally used in the ambient temperature above 55ºC
6.Ultraviolet resistant paint with strong ageing resistance
7.Multi-stage air inlet filtering system, much longer engine service life
8.Multi-stage air inlet filtering system, much longer engine service life
9.Efficiently sealed driver's cab and operator's cab, strong heat protection and anti-sand capability
| Description | Unit | Parameter value | |
| Overall length | mm | 13900 | |
| Overall width | mm | 2800 | |
| Overall Height | mm | 3575 | |
| Axle base | 1st ,2nd axle | mm | 1470 |
| 2nd ,3rd axle | 4105 | ||
| 3rd ,4th axle | 1350 | ||
| Wheel Base | mm | 2304+2075 | |
| Total vehicle mass in travel configuration | kg | 43000 (not including auxiliary counterweight of 1t) | |
| Axle load | 1st and 2nd Axle | kg | 17000 |
| 3rd and 4th Axle | 26000 | ||
| Engine Model | WD615.338 | ||
| Engine rated power | kw/(r/min) | 276/2200 | |
| Engine rated torque | N.m/(r/min) | 1500/1400 | |
| Engine rated rotational speed | r/min | 2100 | |
| Max. travel speed | km/h | 80 | |
| Min. steady travel speed | km/h | 3 | |
| Min. turning diameter | m | 24 | |
| Min. turning diameter at boom tip | m | 29 | |
| Min. ground clearance | mm | 327 | |
| Max. grade ability | % | 40 | |
| Approach angle | ° | 19 | |
| Departure angle | ° | 11 | |
| Braking distance (at 30 km/h, full load ) | m | ≤10 | |
| Oil consumption per 100km | L | 45 | |
| Description | Unit | Parameter value | |||
| Max. total rated lifting capacity | t | 70 | |||
| Min. rated working radius | m | 3 | |||
| Turning radius at turntable tail | mm | 3550 | |||
| Max. load moment | Base boom | KN.m | 2303 | ||
| Fully-extended boom | 1129 | ||||
| Fully-extended boom + Jib | 580.2 | ||||
| Outrigger span | Longitudinal | m | 6.1 | ||
| Lateral | 7.3 | ||||
| Hoist height | Base boom | m | 11.8 | ||
| Fully-extended boom | 44.2 | ||||
| Fully-extended boom + Jib | 59.4 | ||||
| Boom length | Base boom | m | 11.6 | ||
| Fully-extended boom | 44.5 | ||||
| Fully-extended boom + Jib | 59.5 | ||||
| Jib offset angle | ° | 0, 15, 30 | |||
| Time for boom raising | s | 60 | |||
| Time for boom extending fully | s | 80 | |||
| Max. slewing speed | r/min | 2 | |||
| Telescoping time | Fully extended | s | 150 | ||
| Fully retracted | 100 | ||||
| Outrigger extending and retracting time | Outriggerbeam | ExtendingSimultaneously | s | 30 | |
| RetractingSimultaneously | 20 | ||||
| Outriggerjack | ExtendingSimultaneously | 35 | |||
| RetractingSimultaneously | 30 | ||||
| Hoisting speed | Main winch | No load | m/min | 130 | |
| (single line | Full load | 75 | |||
| Auxiliary winch | No load | 108 | |||
| Full load | 98 | ||||
| Exterior noise level | dB (A) | ≤122 | |||
| Noise level at seated position | dB (A) | ≤90 | |||
CONTACT US
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}