215hp GR215 motor grader for sale Introduction
1.The GR215 AVII motor grader adopts Dongkang 6CTA8.3-C215 turbocharged diesel engine with large output torque and power reserve coefficient and low fuel consumption.
2.The gearbox and torque converter are 6WG200 electronically controlled power shift and fixed shaft transmissions produced by Liuzhou ZF. The torque converter has a large torque coefficient, high efficiency, and a wide range of high efficiency. It has good joint performance with engine matching.
3.The drive axle is the Meritor post-production axle.
4.Rear axle main drive is equipped with "NO-SPIN" without self-locking differential.
5.The front steering of the machine adopts a load-sensing full hydraulic steering device.
Specifications of motor grader
| Basic specification |
| Engine model |
6CTAA8.3 6CTA8.3 |
| Rated power/speed |
153kW/2200rpm 160kW/2200rpm |
| Dimension(LxWxH) |
8970×2625×3470mm |
| Operating weight(Standard) |
16500kg |
| Performance specification |
| Travelling speed ,forward |
5,8,11,19,23,38 km/h |
| Travelling speed ,reverse |
5,11,23 km/h |
| Tractive force(f=0.75) |
82KN |
| Max. gradeability |
20% |
| Tire inflation pressure |
260 kPa |
| Working hydraulic pressure |
16 MPa |
| Transmission pressure |
1.3~1.8MPa |
| Operating specification |
| Max. steering angle of front wheels |
±50° |
| Max. lean angle of front wheels |
±17° |
| Max. oscillation angle of front axle |
±15° |
| Max. oscillation angle of balance box |
15 |
| Frame articulation angle |
±27° |
| Min. turning radius using articulation |
7.3m |
| Biade |
| Maximum lift above ground |
450mm |
| Maximum depth of cutting |
500mm |
| Maximum blade position angle |
90° |
| Blade cutting angle |
28°-70° |
| Circle reversing rotation |
360° |
| Moldboard width X height |
4270×610mm |
){kind=link}
){kind=link}